M0610B
Property | Specification |
Data System | MDS |
Data Specs | V1.14.1 |
Description | Stage 3 or 4 pressure ulcer width (same ulcer) |
Group | Asmt |
Type | Number |
Length | 4 |
Fixed Start-End | 924-927 |
Version Notes |
Item Subsets | |
Active | NC,NQ,NP,NSD,NOD,ND,SP,SSD,SOD,SD |
Inactive | NS,NO,NT,SS,SO,ST,XX |
State optional |
Item Values | ||
Value | LOINC | Text |
00.0 | Minimum width (cm) | |
99.9 | Maximum width (cm) | |
- | Not assessed/no information | |
^ | Blank (skip pattern) |
Item Edits | |||
Edit ID | Type | Severity | Edit Text |
-3679 | Format | Fatal |
Values of Numeric Items: Only the values listed in the "Item Values" table of the Detailed Data Specifications Report may be submitted for this item. The submitted value must be greater than or equal to the minimum value listed in the table and less than or equal to the maximum value listed in the table, or it must match one of the remaining special values (if any) that are listed in the table. The length of the submitted value must not exceed the allowed maximum length for the item. Signed numbers (with a leading plus or minus sign) will not be accepted. |
-3682 | Format | Fatal |
Formatting of Numeric Items with Tenths Decimal Values: Only integer values, values with tenths decimals, and the special values (if any) that are listed in the "Item Values" table of the Detailed Data Specifications Report will be accepted for this item. Leading and trailing zeroes may be included or omitted from the submitted value as long as the resulting length of the string does not exceed the allowed maximum length for the item. A decimal point and tenth value may be included; however the fractional portion beyond the tenths decimal place must not be included. The following examples are allowable if the value to be submitted is equal to [1.2] and the maximum length is equal to 4: [1.2], [01.2]. The following values are NOT allowed and will lead to a fatal error: [1.21], [1.20]. The following examples are allowable if the value to be submitted is an integer equal to [1] and the maximum length is equal to 4: [1], [01], [1.], [01.], [1.0], [01.0]. The following values are NOT allowed and will lead to a fatal error: [1.00], [01.00]. |
-3593 | Consistency | Fatal |
a) If M0300C1, M0300D1, or M0300F1 are equal to [1-9], then M0610A, M0610B, and M0610C must contain values that are not equal to [^]. b) If M0300C1, M0300D1, and M0300F1 are all equal to [0,-,^], then M0610A, M0610B, and M0610C must equal [^]. |
-3612 | Consistency | Fatal |
a) If M0210=[0], then all active items from M0300A through M0800C must equal [^]. b) If M0210=[-], then all active items from M0300A through M0300G2 must equal [-]. |
Supplemental Information | |||
Edit ID | Type | Severity | Edit Text |
-9014 | Information | None |
Rounding of Numeric Items with Tenths Decimal Values: This item should be rounded to the nearest tenth decimal place. If the value in the hundredth decimal place is equal to 0 through 4, round the value down to the nearest tenth (i.e., discard the fractional portion of the number after the tenth decimal place). If the value in the hundredth decimal place is equal to 5 through 9, round the value up to the next largest tenth decimal value. |
NOTICE: These materials are in the public domain and cannot be copyrighted.
Generated: 05/08/2014
MDS 3.0 dataspecs V1.14.1 | http://www.careplans.com